How to Get Started in Masonry

Masonry is a craft that has been around for thousands of years, transcending different cultures. It is an art that is extremely rewarding to practice because the final product is a perfect replica of the original. The craftsmanship is also required for industrial revolution factories and the housing stock of major cities. For more information, visit this website at


Lay the foundation. Then you will lay the first course of masonry. A mortar joint of about 1/4 to 3/4 inches is required for this first course of masonry. This is necessary to compensate for the irregularities of the footing or foundation. You must be sure to use a full bed joint between the foundation, footing, and slab. Make sure that you check for levelness before beginning. Otherwise, you may encounter problems when finishing the foundation.

Masonry has a high strength of compression. In addition to being resistant to compression, masonry can also withstand extreme lateral loads and gravity. This is what makes masonry such an excellent choice for foundation walls. But there are a few limitations to masonry construction. In general, it isn’t a good choice for large buildings. If you’re building a house, you’ll need to consider whether masonry is the right choice for your home or not.

The choice of masonry materials has long been based on the geological formations of a particular region. Some countries, for instance, used limestone, sandstone, alabaster, granite, basalt, and porphyry for their temples. In contrast, western Asia lacked stone outcroppings but had clay deposits. Therefore, the Assyrian and Persian empires used sun-dried bricks.

Before installing masonry, make sure you follow the proper techniques to finish the job correctly. For example, mortar should be thumbprint hard on each side, and it should extend to the bedding surfaces of hollow units. When applying mortar to solid units, make sure to use a sled runner. Likewise, mortar should be applied to both sides of the block to ensure a tight seal. When grouting, ensure that the mortar joints are 10 mm thick horizontally and vertically.

Because masonry materials are heavy, they must be supported on solid ground. A concrete slab on top of crushed stone acts as a footing, distributing weight over a larger surface area. It also helps the masonry above to move slightly. This is important as masonry expands and contracts with temperature changes. Without proper footings, masonry can crack or fall in an earthquake. So, be sure to check the soil conditions before choosing a particular type of masonry.

While brick masonry can be very economical and does not require highly skilled labor, there are some disadvantages to this construction technique. For one, bricks are much less durable than stone, and brick joints are thinner. Furthermore, bricks are limited in size and color compared to stone. The finished product also requires plasterwork, which adds to the construction costs. And last but not least, bricks are not as resistant to high-tensile load as stone, so they are not suitable for buildings that have high foot traffic.

The type of mortar used in masonry is important when using it. Type M mortar is used in areas where there is significant load bearing on the structure. Type K mortar is weaker and may fail prematurely. For this reason, type K mortar is no longer included in ASTM C 270 standards. Nevertheless, it is still used in some pre-historic preservation projects. You need to know that mortar is not a perfect material before laying it on the job.

Concrete blocks are another type of masonry construction. Known as breezeblocks, concrete blocks are often larger than regular bricks and are faster to lay. They have lower water absorption rates than brick and are commonly used in industrial buildings. They are also commonly decorated with stucco surfaces. Moreover, they can contribute to green building certification. However, they are not as durable as bricks. Nevertheless, concrete blocks are a great option when it comes to building a wall.